How do I set up the Ploom X Advanced manual lock?

You can lock Ploom X Advanced with a password made up of button presses and slider movements - so only you can unlock it. 

Here's how to set it up:

1. Connect Ploom X Advanced to power.

2. Open and close the device cover.

3. Then, press the button until Ploom X vibrates.

4. The light will flash for around 20 seconds. While it's flashing, create a short sequence of button presses and/or slider movements. You can use a minimum of 3 and a maximum of 10 movements. This will be your password.

5. Open the cover and close it again. Your password is all set up.

To find out more about locking Ploom X, watch our video.