How do I use Ploom X Advanced?

If it's your first time using Ploom X Advanced and Sobranie tobacco sticks, we've made it easy for you.

Here's how to use Ploom X Advanced:

1. If its a brand-new device and you are using it for the first time, you should disactivate shipping mode by connecting and disconnecting USB cable before the first use. You do not have to repeat this step later.

2. Slide cover open and wait for the LED light to turn off. LED light turns off, insert the stick up to the line,  making sure you that you can still see the ventilation holes. Make sure you don't push it in too far. The printed line shouldn't be aligned with the top of the device.

3. The device is set to AUTO ON. One flash of LED and one long vibration indicate that Ploom is heating. In case heating does not start automatically, or if you have deactivated AUTO ON, the device can be started manually by holding down the button area below the LED strip. 

4. When your Ploom is ready to go, the LED strip will be fully lit, and you will feel two short vibrations.

5. Enjoy your Ploom moment.

6. When you've got 20 seconds left, Ploom X Advanced will vibrate and the light strip will pulse slowly. Once you feel one long vibration, your session is finished.

Here's a bit more about how to use Ploom X.